Modular support system accessories
Sound insulation, inlays, end caps, zinc sprays and other essentials for building modular support systems
24 Products
Filter
- Description
- Channel end cap for covering the ends of Hilti MM strut channels
- Material composition
- Polypropylene (PP)
- Description
- Channel end cap for covering the ends of Hilti MQ strut channels
- Material composition
- Plastic component: polypropylene
- Material thickness
- 4 mm
- Description
- Channel end cap for MT-20 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-30 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-40 and MT-50 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-60 strut channels
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-70 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-80 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-90 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Channel end cap for MT-100 girders
- Material composition
- PPB-M02
- Surface finish
- n/a
- Description
- Rubber inlay
- For use with
- MM-C-16, MM-C-30, MM-C-36, MM-C-45
- Material composition
- EPDM
- Temperature resistance
- -40 - 110 °C
- Description
- Channel rubber inlays for sound insulation
- For use with
- MQ channels and M8-M10 threaded rods
- Material composition
- EPDM
- Temperature resistance
- -40 - 110 °C
- Description
- Clip-in rubber inlay for noise reduction in HVAC support structures
- Material composition
- EPDM
- Surface finish
- n/a
- Description
- EPDM insulating band for adding galvanic separation and mild acoustic isolation to MP-PS pipe shoes
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 100 °C
- Material composition
- EPDM, Self-adhesive layer, Release liner
- Description
- Silicone insulating band for adding galvanic separation and mild acoustic isolation to MP-PS pipe shoes
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 210 °C
- Material composition
- Silicone, Self-adhesive layer, Release liner
- Description
- Glass fibre insulating band for adding galvanic separation to MP-PS pipe shoes
- Fire resistance (yes/no)
- No
- Temperature resistance
- -20 - 500 °C
- Material composition
- Texturised E-Glass fibre, Self-adhesive layer
- Description
- Hot-dip galvanised (HDG) threaded pipe with 4.8 steel grade used as an accessory for various applications
- Material composition
- Steel grade 4.6
- Surface finish
- Outdoor Coated - HDG
- Insulation
- Without
- Description
- Galvanised silencer for various applications
- Approvals
- Acoustic insulation DIN 4109 inspected
- Noise reduction
- 18 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Description
- Galvanised silencer for use with compressive loads
- Approvals
- Acustic insulaton DIN 4109 inspected
- For use with
- MQ system
- Material composition
- Connecting part: chromated galvanized steel, Insulation material: EPDM
- Description
- Galvanised insulating connector/silencer for use with tensile loads
- Noise reduction
- 11 dB (A)
- Material composition
- DD11 - DIN EN 10111, EPDM
- Resistance
- Sunlight, weathering, environmental influences
- Description
- Galvanised threaded pipe with 4.6 steel grade used as an accessory for various applications
- Material composition
- Steel grade 4.6
- Surface finish
- Indoor Coated - Electro galvanised
- Base material type
- n/a
- Description
- Universal low-friction interface for use between pipes and MT girders with improved temperature and UV-resistance
- Material composition
- PA66-GF30 (UV-stabilised)
- Surface finish
- n/a
- Description
- Protective separation fleece for use between MV-LDP load distribution plates and roof
- Material composition
- Felt
- Surface finish
- n/a
- Description
- Zinc spray to help protect exposed steel against corrosion
- Material composition
- Zinc (> 90%)
- Surface finish
- Indoor Coated - Electro galvanised